Checkmk
Deutsch
masterlatest (2.3.0)2.2.02.0.01.6.0
to checkmk.com

Monitoring Linux

1. Introduction

If you use unix-type operating systems, you are probably already familiar with the so-called cronjobs. However, cron is actually a daemon, which manages recurring processes in the background and makes sure that they are executed at predefined intervals. Of course, this does not have to be done by the cron programme — it is merely the most common method for automating recurring jobs reliably under Linux, and similarly under AIX or Solaris.

Some of these jobs are essential for safe operation, so they should be included in the host monitoring. In Checkmk you can achieve this with the mk-job script. This small script is placed in front of the actual job and then carries out this task. In the process, mk-job records a variety of measurement data and delivers it to Checkmk. The most important measurement data include when the job was last executed and whether it was executed successfully.

The script mk-job is — as is often the case in Checkmk — a simple shell script which you can check at any time. You therefore have maximum transparency and control at all times, even for the important jobs on your host.

2. Setting up the plug-in

2.1. Setting up the mk-job programme

First, set up the small script on the monitored host to be able to use it. The easiest way to do this is to fetch the programme directly from your Checkmk server with wget and make it executable — in the following example for a Linux server:

root@linux# wget -O /usr/local/bin/mk-job https://myserver/mysite/check_mk/agents/mk-job
root@linux# chmod +x /usr/local/bin/mk-job

If you want to install the script under AIX or Solaris, load mk-job.aix or mk-job.solaris instead. If the wget programme is not available, you can of course download the file in another way, for example by copying with scp.

2.2. Monitoring the first job

To monitor the first job, let’s again take cron as a common example. Let’s say you have a cronjob like this one:

/etc/cron.d/backup
5 0 * * * root /usr/local/bin/backup >/dev/null

This backup job is executed daily at 12:05 am under the user ID root. To monitor this job, use an editor you trust to prefix the command in the line with the script mk-job together with a name. The name will later be used as the service name in Checkmk and must therefore be unique on this host:

/etc/cron.d/backup
# Syntax:
# <minute> <hour> <day> <month> <day of week> <user> mk-job <service name> <command>
5 0 * * * root mk-job nightly-backup /usr/local/bin/backup >/dev/null

When executing the newly defined cronjob, mk-job will try to store the results from the measurement in the /var/lib/check_mk_agent/job/root directory. Since the directory job also belongs to the user root, it is no problem for mk-job to create the user directory root if this does not already exist.

With each call, the agent will look in the directories under /var/lib/check_mk_agent/job/, and add them to the output.

Such a result could look like the following, whereby for the sake of clarity only the relevant part of the agent output is shown here:

<<<job>>>
==> nightly-backup <==
start_time 1613509201
exit_code 0
real_time 2:06.03
user_time 0.62
system_time 0.58
reads 200040
writes 35536
max_res_kbytes 28340
avg_mem_kbytes 0
invol_context_switches 1624
vol_context_switches 2086

3. Adding the service to Checkmk

In Checkmk you will automatically find the service once the job has been executed and the results saved accordingly. So, as usual, go to the service discovery and activate the service:

discover mkjob

On the one hand, you will find all of the measurement points shown above as metrics and in predefined time series graphs. On the other hand, you will also find the measuring points in the summary and in the details for the service:

service mkjob

4. Monitoring the jobs of non-privileged users

If you also want to monitor jobs from users other than root, in the job directory /var/lib/check_mk_agent/job/ first create a user directory and assign the rights to the appropriate user — in the following command example to the user myuser:

root@linux# cd /var/lib/check_mk_agent/job/ && mkdir myuser && chown myuser:myuser myuser

This is what makes it possible in the first place for mk-job to store the results in this directory on behalf of the user.

5. Diagnostic options

If the set-up does not work, you have several options for tracking down the problem(s). Basically, always begin at the starting point of the chain and first check whether you have correctly included the 'mk-job' script, as described in the first steps.

Possible sources of error are:

  • mk-job cannot be found by cron because it is stored in a path which is not recognised by cron. In this case, specify the full path to mk-job.

  • The service name contains spaces and has not been enclosed in quotes (").

  • The job is being run with a user which does not yet have its own directory for storing the results.

If the measurement results have been recorded and saved correctly, check on the Checkmk server whether the results are also passed on correctly by the agent.

You can display the agent output with the following command and forward the output to the less command:

OMD[mysite]:~$ cmk -d myhost | less

Usually the relevant section <<job>> is located very far down in the output.

If the results are not visible here, the reason may be that the agent does not have the necessary permissions in order to read the corresponding files. This can occur, for example, if you do not call the agent with the user 'root', but the results may not be read by other users:

root@linux# ls -l /var/lib/check_mk_agent/job/myUser/
total 5
-rw-rw---- 1 myUser   myUser   186 Jul 21 11:58  nightly-backup

In such cases, either add a permission for all users to read the results:

root@linux# chmod 664 /var/lib/check_mk_agent/job/myUser/nightly-backup

Or you create a group and assign this group to all of the job files. With the following command you only change the group authorisation. The owner is not changed because it remains untouched if nothing is entered before the colon:

root@linux# chown :myJobGroup /var/lib/check_mk_agent/job/myUser/nightly-backup

Make sure that you have created the group beforehand, and as a member of which have added the user with which the agent is called up.

6. Files and directories

Path Meaning

/usr/local/bin/

The script mk-job should be placed in this directory so that it can be called easily.

/var/lib/check_mk_agent/job/

The usual directory under which the results are stored, sorted by user. Note that the path under AIX is different: /tmp/check_mk/job/.
On this page