1. Selecting a Checkmk edition
Before you begin installing Checkmk, you must first decide which of the four available editions you want to use:
The Checkmk Raw Edition (CRE) is free, 100% open source and incorporates Nagios as its core. You can use it to comprehensively monitor complex environments. Support is available in our Forum from the Checkmk community.
The Checkmk Enterprise Free Edition (CFE) is the right one for you if you want to test the Standard Edition without obligation or if you want to use Checkmk on a small scale with one site with up to 25 monitored hosts. The Free Edition contains all of the features of the Standard Edition, is free of charge and unlimited for the first 30 days. Both the Free Edition and the Raw Edition can be upgraded directly to the Standard Edition later without any extra complications.
The Checkmk Enterprise Standard Edition (CEE) is primarily aimed at professional users and offers a number of interesting features beyond the scope of the Raw Edition, such as the Checkmk Micro Core (CMC) with its own very high-performance core which replaces Nagios, reporting, a sophisticated system for the visualisation of performance metrics, a flexible distribution of Checkmk monitoring agents (which obtain information from the monitored target systems), and much more. For the Standard Edition you can optionally receive professional support from us or from one of our partners.
The Checkmk Enterprise Managed Services Edition (CME) is a multi-client-capable extension of the Standard Edition which, via distributed monitoring, has all of the necessary functions for operating an individual Checkmk site for each one of multiple independent customers. If you want to provide these services for your customers, this is your edition. More detailed information on the concept of managed services can be found in the introduction to this article.
You can find a table of the differences between the editions on our homepage.
Whenever in this User guide we discuss functions that apply to only one of the Enterprise Editions — i.e. the CEE, CFE or CME — we indicate this with the symbol as in this paragraph.
2. Selecting your version
We are continually developing all editions of Checkmk and therefore there are different versions of each edition. To get started, we generally recommend the latest stable version. A detailed overview of what other versions are available can be found in this article.
3. The software installation
The Checkmk server fundamentally requires a Linux system on which it can run. (Of course, you can still monitor Windows and other operating systems). If you do not want to set up your own Linux server, you can also run Checkmk using Docker or an appliance. There are four options in total, which we briefly present below and which are installed in different ways. When you have finished installing your variant, continue reading in the next chapter, which is about creating a site.
3.1. Linux server
The installation of Checkmk on a Linux server — whether on a 'real' or on a virtual machine — is the standard scenario. If you have basic Linux knowledge, the installation is very simple. All the software you need is either included in your Linux distribution or in our Checkmk package.
Checkmk supports the following Linux distributions: Red Hat Enterprise Linux (RHEL)/CentOS, SUSE Linux Enterprise Server (SLES), Debian and Ubuntu. For each Checkmk edition, Checkmk version and Linux distribution, there is a separate customised package from us that you can install with the package manager in your Linux distribution.
3.2. The virtual appliance
With the Checkmk virt1 virtual appliance you get a ready-to-use virtual machine with an OVA (Open Virtualization Archive) file format that you can use in a hypervisor such as VirtualBox or VMware ESXi.
The appliance contains the Linux operating system Debian and a firmware which, among other things, provides a Web-GUI for managing the appliance. The advantage with the appliance, apart from a pre-installed system, is that you can configure the operating system, the appliance and Checkmk completely via the graphical user interface without having to use the Linux command line. The installation of the Checkmk software and the creation of sites is also carried out via the Web-GUI of the appliance.
The virtual appliance has its own version management, different from the Checkmk software. Therefore, you can update the appliance software by installing a new firmware — independently of the Checkmk software installed in the appliance.
The virtual appliance is available for all Enterprise Editions, and for the Free Edition as a free demo version. You can find out how to proceed with the installation in the Quick Start Guide.
3.3. The physical appliance
You can go one step further with the physical appliance — also known as the hardware appliance. Here, the complete software you need for Checkmk comes pre-installed and ready to use on a device, for example, to install directly in your data centre. You can connect two physical appliances together to form a high-availability cluster (HA cluster) in just a few steps.
3.4. Docker container
If you would like to provide Checkmk using a Docker container, you also have this option. We support both Raw Edition and Enterprise Editions with ready-made container images that can be set up with just a few commands.
You can find the instructions for this in the article on installing as a Docker container.
4. Creating a site
Checkmk has a special feature that may seem unimportant at first, but it is one which has proven very useful in practice — you can run several independent sites of Checkmk in parallel on the same server. Each site can even run a different version of Checkmk.
Here are two common uses for this well thought-out feature:
An uncomplicated method for trying out a new Checkmk version.
The parallel operation of a test site for the monitoring of hosts that are not yet operational.
If you have just installed Checkmk on a Linux server, there will be no sites as yet. In this chapter we will show you how to create a site following an installation of Checkmk software on a Linux distribution.
Note: Checkmk appliances are administered via a Web-GUI that also covers the creation of sites. This is explained in the article on the appliance. If you are running Checkmk in a Docker container, a site will be created for you automatically during its installation.
First choose a name for your site.
This may only consist of letters and numbers.
The convention here is lower case letters.
In the User guide, we use the name
mysite in all examples.
Replace this name with your own site name.
The creation itself is very simple. As
root, simply enter the command
omd create followed by the name for the site:
root@linux# omd create mysite Adding /opt/omd/sites/mysite/tmp to /etc/fstab. Creating temporary filesystem /omd/sites/mysite/tmp...OK Updating core configuration... Generating configuration for core (type cmc)...Creating helper config...OK OK Restarting Apache...OK Created new site mysite with version 2.0.0.cee. The site can be started with omd start mysite. The default web UI is available at http://linux/mysite/ The admin user for the web applications is cmkadmin with password: jEpCM9T4 For command line administration of the site, log in with 'omd su mysite'. After logging in, you can change the password for cmkadmin with 'htpasswd etc/htpasswd cmkadmin'.
When creating a new site, the following events take place:
A Linux user (without password) and a Linux group are created with the name of the site. This user is known as the site user.
A home directory is created for the site in the
A suitable default configuration is copied into the new directory.
A user with the name
cmkadminand a random password is created for the web interface in Checkmk. Make a note of this password. You can also change the password as described below.
Note: If you receive this or a similar error message when trying to create the site:
root@linux# omd create mysite Group 'mysite' already existing.
then a Linux user or group already exists with the site name you specified. In such a case, simply choose a different name.
Once you have created the new site, subsequent administration is no longer carried out as the
root, but instead as the site user.
The easiest way to become a site user is with the following command:
root@linux# su - mysite OMD[mysite]:~$
You can see from the changed prompt that you are now logged into the site, and as the command
pwd shows, you will then be automatically in the site’s home directory:
OMD[mysite]:~$ pwd /omd/sites/mysite
As you have seen in the output from
omd create, an administrative Checkmk user named
cmkadmin is automatically created when the site is created.
This user is for logging into the web interface in Checkmk and has been given a random password.
As the site user, you can easily change this password:
OMD[mysite]:~$ htpasswd etc/htpasswd cmkadmin New password: ***** Re-type new password: ***** Updating password for user cmkadmin
By the way — whenever we give file path names in the User guide that do not begin with a slash, they refer to the home directory for the site.
If you are in this directory, you can therefore use such paths directly in this way.
This also applies, for example, to the file
etc/htpasswd, whose absolute path here is
This file contains the passwords for the Checkmk users of this site.
Do not confuse this file with
5. Starting a site
A site can be started or stopped.
The start type is automatic, which means that a started site is also restarted after a reboot of the computer.
Newly-created sites nevertheless begin their lives in a stopped state.
You can easily check this with the command
omd status, which shows the status of all of the individual processes that are necessary to operate the site:
OMD[mysite]:~$ omd status mkeventd: stopped liveproxyd: stopped mknotifyd: stopped rrdcached: stopped cmc: stopped apache: stopped dcd: stopped redis: stopped crontab: stopped ----------------------- Overall state: stopped
With a simple
omd start you can start the site:
OMD[mysite]:~$ omd start Creating temporary filesystem /omd/sites/mysite/tmp...OK Starting mkeventd...OK Starting liveproxyd...OK Starting mknotifyd...OK Starting rrdcached...OK Starting cmc...OK Starting apache...OK Starting dcd...OK Starting redis...OK Initializing Crontab...OK
As expected, afterwards the status shows all services as
OMD[mysite]:~$ omd status mkeventd: running liveproxyd: running mknotifyd: running rrdcached: running cmc: running apache: running dcd: running redis: running crontab: running ----------------------- Overall state: running
Since the Raw Edition does not have all the features of the Enterprise Editions, you will see fewer services there.
In addition, you will find
nagios as the core instead of
OMD[mysite]:~$ omd status mkeventd: running rrdcached: running npcd: running nagios: running apache: running redis: running crontab: running ----------------------- Overall state: running
6. Logging in
With the site running, you can now proceed.
Each site has its own URL that you can open in your browser.
This URL consists of the host name or IP address of the Checkmk server, a slash and the name of the site, e.g.
You will find this login dialogue at this address:
Now log in with the user name
cmkadmin and the password you chose or changed at the beginning.
This will take you to the start page in Checkmk, which we will look at in more detail in the next chapter.
If your site has not started, you will see the following error message instead of the login dialogue:
If there is no site with this name at all — or you have landed on a server without Checkmk — it will look more like this:
Important: As soon as you are running Checkmk productively, we recommend that for security reasons you only allow access to the interface in a secured manner. You can find out what you need to do for this in the article on securing the web interface with HTTPS.